You have no items in your shopping cart.

Subtotal: $0.00

Motor Accessories

Page:
  1. 1
  2. 2
  3. 3
  1. 5mm Shaft Cone Nut for Regular Multicopter Motor (4pcs)

    $1.50
    Replacement cone nuts for 2204/2205/2206 motor with 5mm regular threaded shaft. View Details
  2. Water Jacket for 36mm Brushless Inrunner Motor

    $5.00
    Water jacket for 36mm diameter inrunner motors.
    Allow you provide water-cooling to a 36mm diameter inrunner motor. A must have for using inrunner motors in a boat. View Details
  3. 6in (200mm) 14AWG Motor Extension Wire with 3.5mm Bullet Connector

    $2.16
    Extension cable for Motor and ESC View Details

    Out of stock

  4. 5mm Shaft Cone Nut for Reverse Multicopter Motor (4pcs)

    $1.50
    Replacement cone nuts for MT2204 2206motor with 5mm reverse threaded shaft. View Details
  5. Water Jacket for 40mm Brushless Inrunner Motor Red

    $7.00
    Water jacket for 40mm diameter inrunner motors.
    Allow you provide water-cooling to a 40mm diameter inrunner motor. A must have for using inrunner motors in a boat. View Details
  6. Water Jacket for 28mm Brushless Inrunner Motor

    Regular Price: $6.00

    Special Price $4.50

    Water jacket for 28mm diameter inrunner motors.
    Allow you provide water-cooling to a 28mm diameter inrunner motor. A must have for using inrunner motors in a boat. View Details
  7. Metal Prop Ring Adaptor (2pcs)

    $1.00
    Metal ring adapter for 5.5mm shaft prop saver.
    Use for SunnySky 2204/2206 or equivalent motors View Details

    Out of stock

  8. 6mm Shaft for GForce G46 Brushless Outrunner Motor (5055)

    Regular Price: $3.49

    Special Price $1.90

    6mm Shaft for GForce G46 Brushless Outrunner Motor (5055)
    G46 motors are available with both 6mm and 8mm shafts. Make sure this is the shaft you need. View Details
  9. Shaft for GForce G15 Brushless Outrunner Motor (2820)

    $1.00
    Shaft for GForce G15 Brushless Outrunner Motor (2820) View Details
  10. 8mm Shaft for GForce G46 Brushless Outrunner Motor (5055)

    $3.49
    8mm Shaft for GForce G46 Brushless Outrunner Motor (5055)
    Make sure your motor needs 8mm shaft and NOT 6mm. View Details

    Out of stock

Page:
  1. 1
  2. 2
  3. 3