1. GForce G32 Brushless Outrunner Motor (4250-800KV)
Subtotal: $28.50

GForce G32 Brushless Outrunner Motor (4250-800KV)

More Views

GForce G32 Brushless Outrunner Motor (4250-800KV)

SKU: XYH-MT-0177

Availability: In stock

Regular Price: $35.00

Special Price $28.50

Details

The G32 (42-50) brushless out-runner motor can replace a .40 - .46 two stroke nitro engines and is equivalent to E-Flite Power 32 / AXI 2826. It is capable of producing up to 6 lb of thrust and generate about 720W of power.

Specifications:

  • KV: Listed as 800, tested to be approx. 810.
  • Weight: 7.54oz (214g) for motor only, not including mounting accessories.
  • Motor Diameter: Approx. 42mm
  • Connector: 4mm bullet connector
  • Shaft diameter: 5 mm
  • Max efficiency: Approx. 40A
  • Max Load: Approx. 50A

Motor Dimensions

Recommended Setup:

  • 60A brushless motor ESC
  • 3-4S LiPO and at least 3300-4000mAh.
  • Prop Selection: Remember to always use props designed for electric motors, nitro props are heavier and might overload the motor.
    With 4S LiPO: 12x6 or 11x5.5 or 11x7
    With 3S LiPO: 13x6.5 or 13x8
  • The above prop selections are recommended for sports flying at open throttle. You may use slightly larger props if you do not fly at constant open throttle.

Package Content:

  • 4250 800kv brushless outrunner motor
  • prop adapter
  • radial mount

Mounting Options:

The included accessories allow you to mount the motor in front of the firewall. Shown below is the motor with radial mount installed on the back and prop adapter installed on the front, ready to be installed in front of the firewall.

If you would like to mount it behind the firewall, you will need to purchase the 5mm Collet Adapter.

Additional Information

SKU XYH-MT-0177
Motor Weight (g) 214
KV 800
Estimated Output (watt) 1010
Motor Type Out-Runner
Motor Class Power-32
Motor Usage Airplane

Customer Reviews

Converted a nearly 40 year old nitro Sig Kadet MKII with Skywalker 60 amp, 4s 4000MAH Review by Jack
Quality
Value
Overall
Rebuilt my nearly 40 year old crashed Sig Kadet MKII and replaced my Enya 35 with the G32. Weighs in a 5.5 lbs ready to fly. Jumps off the runway, climbs nearly straight up, after 12 minute flying time still have about 40% battery left. Been flying it since Sept 2018 and over 100 flights with no problems. Getting ready to get one for my Mermaid Seaplane. Great buy and value. (Posted on 4/21/2019)
Awesome Motors --- VERY POOR ValueHobby CUSTOMER SERVICE!!! Review by LOWELL
Quality
Value
Overall
I now own 5 of these motors and they are awesome! I purchased the first two of them in the winter months for two planes I was putting together. A 40 size Das Ugly Stick and a 40 size CAP 232, both extremely similar in weight. As the months went by and winter ended I mounted one in my stick and very early on the motor kept separating and coming apart, the inner shaft and housing would separate from the outer casing during flight. The 'C' clip would walk itself off during use. I called Value Hobby on this and they told me that since I purchased the motor a few months back they could not do anything, not even an even swap. I guess they don't support or stand behind Xmas shopping, or shopping early, or buying extra!!! I thought that was very poor service because I am a valued customer. As I mentioned I went on to purchase at least 5 of these G32 motors plus many others many including G46 and 4s and 6s batteries along with so many 80 Amp ESC's, REC, connectors, and many other RC supplies. And they couldn't bend on one $30 dollar motor! That's also why I shop at MotionRC as well because they displayed top notch are a no hassle SERVICE and PRICING. Value Hobby has great prices but this motor left me speechless.

Anyhow, this motor, even though the first one was a dud, this motor is awesome! I run this motor with my stick 40 59" WS and my 40 size CAP 57" WS. I run the same setup in both. The G32 with a 14x7 prop, 80 AMP Hobbywing ESC and GForce 4s 30C 4000 battery. Both of these planes have plenty of power, unlimited vertical and they can take off inside 3 feet. Depending on throttle management I get between 6 and 8 minutes flying time. Both planes weigh about the same with these setups. The STICK weighs 4.3 lbs with only servos, and 5.8 lbs with this setup. The CAP 232 weighs 4.45 with only servos and about 5.9 with this setup. At roughly 700 WATTS for the G32 these models are averaging about 120 WATTS per POUND.

Very economical and very powerful. I would recommend this motor for sure but I would give a warning about dealing with Value Hobbies customer service! (Posted on 9/12/2018)
Great but missing screws Review by Matthew
Quality
Value
Overall
Great for my sabre 47e kit that I built with a 4s 3300mah battery. It was missing 2 of the mounting screws for the radial mount behind motor but I'm going to get some more hopefully. Using sky walker 80a esc and dosnt even get warm. (Posted on 5/14/2018)
Are you kidding me? Best value motor I've found. Review by rcvideoreviews.com
Value
Overall
Quality
I build and fly a *lot*. I've been looking for alternatives to the more expensive options and this G32 is the ticket. 5s 11x7 prop yielded over 1000w @ 55a which is just north of the spec max. I have an 11x5.5 prop on order which should get the amperage below the rated max. I installed this motor on a 60" Tower Hobbies Sport and the plane flew awesome. I haven't beat on it yet because of my amp draw, but when the new prop comes, I'll put it through its paces.

It made about 750w with 5s and a 10x6 prop at a very comfortable 38a.

No fancy box, no fancy logs, just a simple working powerful .32 class brushless at an exceptional price. My only gripe is that it only comes with a bullet prop nut and not a standard prop nut to fit under a spinner, but that's no big deal. @ $30 I'll get over it. Thanks for making these available to us Value Hobby!

John
rcvideoreviews.com

PS Watt meter results video available on my YT channel if you're interested. (Posted on 1/3/2018)
Great price for a top quality motor Review by Chris
Quality
Value
Overall
I took a chance on this motor and I am happy and impressed. I am using it in a Great Planes Zero with a 4s battery and a 13x8 Master Airscrew prop and it has incredible power and I am getting around 7 minutes when I fly 3/4 to full throttle. The plane has an open cowl and the motor and ESC both run cool. I would definitely buy this brand again. (Posted on 10/13/2017)
Exceptional Value Review by David
Value
Overall
Quality
I'm very happy with this motor. I put it on my Sabre 47 (which is also a great deal from Value Hobby) and it gives me unlimited vertical and plenty of power for whatever I throw at it. I kept putting off buying it because I was worried the price was just too good to be true. After reading a bunch of reviews over at Profile Brothers.com I went ahead with the purchase. Those guys over there are ruthlessly honest. I'm glad I listened. It's a great motor, period. (Posted on 4/26/2017)
Great Motor Review by Kevin
Overall
Quality
Value
Using the motor in a 60 in Tower Hobbies Sport. Great motor at a great price! Plenty of power on 4s batteries (Posted on 3/24/2017)
Excellent value, reliable power, easy to assemble and mount Review by Charlie
Overall
Quality
Value
I'm flying this motor on a 58" Ugly Stik...unlimited vertical with an 11x7...3700 mah 4s....60 amp ESC
I think I've got 3-4 of them in the drawer..... going to put one on a 1951 Ringmaster conversion to RC too. (Posted on 1/20/2016)
motor mount Review by willie
Overall
Quality
Value
trouble mount motor to firewall
motor mount screws on mounting plate too short
ears to mount motor to firewall too close to motor housing (Posted on 7/26/2015)
performance Review by virgil
Quality
Value
Overall
more than enough power to fly a 6lb. airplane.
using a 50amp esc,and a 4000mah 40c 3 cell (Posted on 3/8/2015)
Excellent motor to power 46 size airplane. Review by Nathan
Overall
Quality
Value
Excellent power house motor using a 14x7 APC e prop 5000 4s 40c lipo 80 amp Hobby Wing ESC over 1000 watts. Will fly a 59" VQ Focke Wulf with this set up at half throttle for for 9 minutes. Battery did not even get hot during the flights. Take offs in less then six feet. I am using several of these motors and setups in many 46 size planes with great results. More power then a 2 stroke OS 61 fx that I fly in a similar plane. Using a 4s pack keeps the weight down on the whole setup. I have also used the 4000 4s pack on some of the lighter setups with this motor still works great with the same prop. (Posted on 6/18/2014)
Great Buy Review by ROBERT
Value
Overall
Quality
This is a fantastic motor. Ive had it in two planes. One being a large 5 1/2 lbs aircraft and the other a smaller 3 lbs plane. Its built good, and can take abuse. (Posted on 7/12/2013)
Great Motor Review by JavaScript
Quality
Value
Overall
I use this motor on a 52" Extra... Fly's amazing.. Lots of power! (Posted on 3/26/2013)

Add Your Review

You must have purchased this product through Value Hobby to submit a review.

GForce G32 Brushless Outrunner Motor (4250-800KV)

USD

$35.00

4.55

13