These Items Are Commonly Purchased Together:
This Item: Power HD 1501MG Metal Gear Servo
Towerpro SG90 9g Micro Servo
$3.50
 
$2.65
Power HD 1711MG Metal Gear Mini Servo
$8.15
 
$6.75
Quickie Super Thin Instant Cure CA Glue (1 oz Bottle)
$2.49
Price for all: $24.74
Specification
- Voltage: 4.8~6.0v
- Speed: 0.16~0.14sec
- Torque: 15.5~17.0kg/cm (215.3~236.1oz/in)
- Bearings: 2 Ball Bearings
- Gears: Metal
- Weight: 60g
- Dimension: 40.7x20.5x39.5mm
| SKU | PHD-SV-0370 |
|---|---|
| Size/Class | Standard |
| Digital/Analog | Analog |
| Gear Type | Metal |
| Torque (oz/in) | 215.3~236.1 |
| Speed (sec/60 deg) | 0.16 |
| Weight (gram) | 60 |
| Brand | Power HD |
Would you recommend this product to a friend? Yes |
great bang for your buck(Posted on March 25, 2013) This servo fits all of my traxxas vehicles and the servo horns fit right on. Fyi for anyone wondering it uses a futaba horn. I will be buying more of these and telling everyone I know about them. |
Would you recommend this product to a friend? Yes |
A little skeptical at first(Posted on March 8, 2013) Even after reading all of the good reviews for these servos, I was still a little skeptical at first - once I got it in my truck every last bit of skepticism went out the door! This thing has plenty of torque for my 1/10 builds and its all metal gears make me feel that much more secure when bashing this thing. Price was on point as well, so I bought a handful to keep on hand for new rides or replacements. All in all, I dont think you can go wrong with this servo - it definitely delivers and definitely deserves the praise its been given. |
Would you recommend this product to a friend? Yes |
Great cheap servo!(Posted on February 11, 2013) Installed in my savage X for steering. For the price, couldn't be happier! Seems very high quality! Time will tell durability. |
Would you recommend this product to a friend? Yes |
Excellent servo for the money(Posted on January 21, 2013) I have purchased nearly 40 of these servos over the past few years and have had ZERO problems with them. The servos center reasonably and have the power to use on my 50-100 cc models. I use 6 volts regulated to power these servos. |
Would you recommend this product to a friend? Yes |
1501 mg(Posted on January 13, 2013) A very precise and strong servo for a great low price. I will use these in all my planes from now on. |
Would you recommend this product to a friend? Yes |
Excellent value for your money.(Posted on January 11, 2013) I have used dozens of the HD 1501 MG in 20cc to 50cc gas powered airplanes, scale warbirds and aerobatic. They are built well, have heavy duty wiring and decent servo arms. On earlier versions the case dimension below the mounting grommets was about 1/8 inch taller than other brands. This meant you had to open the servo pocket a little before you could get it in. Not a real problem. However, the last batch I received (from Value Hobby) did not have this size difference and will fit in most servo pockets without modification. I can purchase six of these servos for less than the cost of one of the other name brands with similar specifications. I recommend them to all my friends. |
Would you recommend this product to a friend? Yes |
Powerful, dependable, accurate, smooth,and at a low cost(Posted on January 10, 2013) I have over 50 flights using the HD 1501MG servos on a 3D profile plane .52 cu in nitro engine. The servos have been totured with constant movement, and a high "Work Load"; 50 to 60 degree deflection on some surfaces and has performed flawlessly.This order is my second order for these servos., but not my last. These will go in a EXTRA 300S - with a .91 size nitro engine. |
Would you recommend this product to a friend? Yes |
Great Servo(Posted on November 19, 2012) This is a great servo for the money. I have put 50-60 on a bunch of different planes and only had one that would not center all the way. |
Would you recommend this product to a friend? Yes |
great servo(Posted on August 23, 2012) just a great servo for a cheap price |


