You have no items in your shopping cart.

Subtotal: $0.00

Hobbywing Skywalker 80A ESC with 5A UBEC (T-Connector)

More Views

Hobbywing Skywalker 80A ESC with 5A UBEC (T-Connector)

SKU: HWG-SC-4447

Availability: In stock




  • Output: Continuous 80A, Burst 100A up to 10 Secs.
  • Input Voltage: 2-6S LiPO
  • BEC: Switch mode BEC 4A/5V
  • Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
  • Connector: 4mm bullet connector female
  • Size: 86mm (L) * 38mm (W) * 12mm (H).
  • Weight: 82g.

2.1 Safety Arming Feature:Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:

  • Brake Setting: brake enabled / brake disabled.
  • Battery Type: Li-xx (Li-ion or LiPo) / Ni-xx (NiMH or NiCd).
  • Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
  • Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
  • Start Mode: normal / soft / very soft.
  • Timing: low / medium / high.
  • Lipo Battery Cells: Auto calculate / Set the cells number manually.
  • Reset: the programmable items to its default setting.

2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Additional Information

Output No
Input Voltage 2-6S LiPO
Usage Airplane/Heli/Multicopter
BEC Built-in Switching BEC
ESC Series Hobbywing SkyWalker

Customer Reviews

Great esc Review by Matthew
Using on a Gforce g32 with 3300 4s lipo on my Sabre 47 from vh and i used epoxy to waterproof Tim for use on arc boogie board with the same motor setup (Posted on 7/5/2018)

Add Your Review

You must have purchased this product through Value Hobby to submit a review.

Hobbywing Skywalker 80A ESC with 5A UBEC (T-Connector)