The Starmax F9F features a 64mm EDF motor and fixed landing gear for runway-takeoff. Made of crash-resistant EPO foam.
- Wingspan: 30.3 in (770 mm)
- Length: 31.2 in (793 mm)
- Flying weight: 1.1 lb (520 g)
- 64mm ducted fan
- Motor system: 2601-4000kv outrunner brushless motor
- Speed Control: 30A ESC
- Servo: 9g micro servo (3pcs)
- 64mm EDF
- 1300mAh, 3S 25C LiPO
- Your own TX and RX
|Size Class||64mm EDF|
Would you recommend this product to a friend? Yes
Very nice plane.(Posted on May 24, 2013)
Received the plane earlier today. The build was very simple with no reference to the manual needed. Taking my time, and allowing the epoxy full cure took about 1.5 hours. The plane is very nice looking, and has no defects.
The maiden flight was fantastic. I used a 3 cell 2200mah battery ( I had to remove a small bit of foam in the rear portion of the battery compartment to fit ) With full throttle, the plane lifted off in 16 feet and had enough power to go vertical immediately. No trimming, no re-balancing was needed.