These Items Are Commonly Purchased Together:
This Item: Tarot FY450 Quadcopter Frame(TL2749-05)
USBasp Programmer For KK Flight Control Board
$4.00
KK Compatible Multi-Rotor Control Board (Blue Ver. 2.5 Firmware)
$14.99
$11.99
Tarot Landing Skid Nut For 450 Helicopter(Yellow) TL022-03
$1.09
Price for all: $23.08
Specifications:
- Empty Weight: 282g(9.95oz)
- Wheelbase: 450mm
- Flying Weight: 800-1200g(28.22-42.33oz)
- prop: 10x4.5(not included)
- Battery: 3S 1500-2600mAh(not included)
- Motor: 2212-2216(not included)
- ESC: 20A-30A(not included)
The arms are made of nylon66 and 30% ultra high strength materials. They are more resistant to shock and impact.
The lower motor mounting location makes the CG of quadcopter lower.
A large space for control system and electronic stuff.
Frame plates are also the PCB board which can be used as distribution board. This makes the connection between the battery and ESCs quite easy.
The new specially designed M2.5 bolts are for secure the arms to the frame plates.
It shows how the ESCs are connected.
| SKU | FYM-QC-1954 |
|---|
Would you recommend this product to a friend? Yes |
good product(Posted on April 23, 2013) It's a good frame. My only problem was the Skywhatever 4 in 1 ESC doesn't fit the top part without hitting the tops of the frame bolts, and can not fit in the lower part with a typical 3 cell battery. I had to raise it up slightly with a square balsa standoff, then stick my Ardupilot control board on top of that. Unless you use this exact setup, it will not effect you though. Other than that 1 quirk, it's a quality frame at a great price. 4 park 400s equivalents and a 3s 4k battery will hover this frame at 45% power on 10x4.7 slow flys. |
Would you recommend this product to a friend? Yes |
Its a Quad!!(Posted on April 9, 2013) This quad is just like other "Flame Wheel" quads out there by numerous manufacturers. DJI, Hobbyking and others make this same "type" of quad. However, the arms on this thing are thinner than others I've seen, so you are more likely to break them. Its a nice quad with PCB (no need for power distro board) but order extra arms if your a newbie!! |
Would you recommend this product to a friend? Yes |
economical, easy frame for a 450 size quad(Posted on February 14, 2013) had this quad soldered up and rtf in 1.5 hrs |
Other Items You Might Be Interested In:
-
Hobbywing FlyFun 18A Brushless ESC
$15.99 $13.10 -
Hobbywing FlyFun 40A Brushless ESC with UBEC
$29.99 $23.99
